{"product_id":"studio-technologies-model-362a-listen-only-beltpack","title":"Studio Technologies Model 362A Listen-Only Beltpack","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eModel 362A Listen-Only Beltpack\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a self-contained 2-channel user device that supports headphone monitoring of two audio channels associated with the Dante® audio-over-Ethernet media networking technology. Each Model 362A is intended to be used by one user, providing them with the form factor, reliability, and features needed to be effective in a variety of applications. It's expected that most applications will use multiple Model 362A units to support the individual audio monitoring needs of a group of users.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante audio-over-Ethernet technology\u003c\/li\u003e\n\u003cli\u003eConfigurable audio channel routing\u003c\/li\u003e\n\u003cli\u003eDual level controls\u003c\/li\u003e\n\u003cli\u003eExcellent audio quality\u003c\/li\u003e\n\u003cli\u003e1\/4-inch and 3.5 mm output jacks\u003c\/li\u003e\n\u003cli\u003ePower-over-Ethernet (PoE) powered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA wide range audio-monitoring applications can be supported, including sports and entertainment TV and radio events, web streaming broadcasts, corporate and government AV installations, and post-production facilities. The Model 362A can be used with other high-performance Dante-enabled products from Studio Technologies. These include a range of broadcast-oriented units such as party-line (PL) intercom and IFB interfaces, 1-, 2-, and 4-channel intercom beltpacks, on-air beltpacks, and announcer's consoles. And, of course, the Model 362A is interoperable with other Dante-enabled products from literally hundreds of other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSetup and Operation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSetup and operation of the Model 362A is fast and simple. A Neutrik® etherCON® RJ45 jack is used to interconnect with a twisted-pair Ethernet cable associated with a port on a PoE-enabled network switch. This connection provides both power and bidirectional digital audio. Both ¼-inch and 3.5 mm 3-conductor (\"stereo\") headphone jacks allow connection of a wide range of stereo headphones, single- or dual-ear broadcast headsets, and stereo or monaural earpieces or earbuds. The Dante Controller personal computer application will be used to route (Dante subscribe) one or two digital audio sources to the Model 362A's Dante receiver (input) channels. The Studio Technologies' STcontroller software application is used to configure the Model 362A's functions to meet the needs of specific applications.\u003c\/p\u003e\n\u003cp\u003eTwo push-in\/push-out rotary controls (\"pots\") make it easy for the user to set and maintain the desired level on the 2-channel headphone output. Four LEDs provide a clear and complete indication of the unit's operating status. The Model 362A's enclosure is made from an aluminum alloy which offers both ruggedness and light weight. A stainless steel \"belt clip,\" located on the back of the unit, allows direct attachment to a user's clothing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDante Audio-over-Ethernet\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudio data is sent to the Model 362A using the Dante audio-over-Ethernet media networking technology. As a Dante-compliant device, one or two audio sources will be routed (subscribed) to the Model 362A's receiver (input) audio channels using the Dante Controller software application. The Model 362A is compatible with Dante digital audio sources that have a sample rate of 44.1, 48, 88.2, or 96 kHz and a bit depth of up to 24. Two bi-color LEDs provide an indication of the status of the Dante connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration Flexibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeveral Model 362A configuration choices are available, allowing the unit to meet the needs of specific applications and user preferences. All configuration choices are made using the STcontroller software application that communicates with the Model 362A by way of the unit's Ethernet network connection. Configurable parameters include input channel assignment, level control operation, and minimum headphone output level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio Quality\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 362A's performance is completely \"pro\" with audio quality that's more typical of high-end studio equipment. Audio signals arrive via two Dante receiver (input) channels and pass into the Model 362A's processor which allows signal routing and headphone level control to be performed within the digital domain. This provides routing flexibility, allows precise level control, and keeps the two rotary controls (pots) from directly handling analog audio signals. The audio channels destined for the two headphone output channels are sent to a high-performance digital-to-analog converter (DAC) integrated circuit and then on to a robust 2-channel output driver circuit. High audio signal levels can be provided to a variety of headphones, headsets, and earpieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEthernet Data and PoE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 362A connects to an Ethernet local-area-network (LAN) using a standard 100 Mb\/s twisted-pair Ethernet interface. The physical interconnection is made by way of an etherCON RJ45 connector. While compatible with standard RJ45 plugs, etherCON allows a ruggedized and locking interconnection for harsh or high-reliability environments. An LED displays the status of the network connection.\u003c\/p\u003e\n\u003cp\u003eThe Model 362A's operating power is provided by way of the Ethernet interface using the 802.3af Power-over-Ethernet (PoE) standard. This allows fast and efficient interconnection with the associated data network. To support PoE power management, the Model 362A's PoE interface reports to the power sourcing equipment (PSE) that it's a class 1 (very low power) device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuture Capabilities and Firmware Updating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 362A was designed such that its capabilities and performance can be easily enhanced in the future. A USB receptacle, located on the unit's main circuit board (underneath the unit's cover), allows the application firmware (embedded software) to be updated using a standard USB flash drive. The Model 362A uses an UltimoX2 integrated circuit from Audinate to implement its Dante interface. The firmware in this integrated circuit can be updated via the unit's Ethernet connection, helping to ensure that its capabilities remain up to date.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePower-over-Ethernet (PoE): class 1 (very low power, ≤3.84 watts) per IEEE® 802.3af\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Audio Technology:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eType: Dante audio-over-Ethernet\u003c\/li\u003e\n\u003cli\u003eAES67-2018 Support: yes, selectable on\/off\u003c\/li\u003e\n\u003cli\u003eDante Domain Manager (DDM) Support: yes\u003c\/li\u003e\n\u003cli\u003eBit Depth: up to 24\u003c\/li\u003e\n\u003cli\u003eSample Rates: 44.1, 48, 88.2 and 96 kHz including some pull-up\/down values\u003c\/li\u003e\n\u003cli\u003eDante Receiver (Input) Channels: 2\u003c\/li\u003e\n\u003cli\u003eDante Audio Flows: 2, receiver\u003c\/li\u003e\n\u003cli\u003eReceiver (Input) Nominal Level: –20 dBFS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Interface:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eType: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) not supported)\u003c\/li\u003e\n\u003cli\u003ePower-over-Ethernet (PoE): Per IEEE 802.3af\u003c\/li\u003e\n\u003cli\u003eData Rate: 100 Mb\/s (10 Mb\/s and 1000 Mb\/s not supported)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Output:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eType: Dual-channel\u003c\/li\u003e\n\u003cli\u003eCompatibility: intended for connection to mono or stereo headsets or earpieces with nominal impedance of 50 ohms or greater\u003c\/li\u003e\n\u003cli\u003eMaximum Output Voltage: 3.8 Vrms, 1 kHz, with 150 ohms load\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz, +0\/–2 dB\u003c\/li\u003e\n\u003cli\u003eDistortion (THD+N): \u0026lt;0.002%\u003c\/li\u003e\n\u003cli\u003eDynamic Range: \u0026gt;100 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone Output: ¼-inch 3-conductor jack and 3.5 mm 3-conductor jack\u003c\/li\u003e\n\u003cli\u003eEthernet: Neutrik etherCON RJ45\u003c\/li\u003e\n\u003cli\u003eUSB: type A receptacle (located inside Model 362A's enclosure and used only for updating application firmware)\u003c\/li\u003e\n\u003cli\u003eConfiguration: uses Studio Technologies' STcontroller personal computer application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to 50 degrees C (32 to 122 degrees F)\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)\u003c\/li\u003e\n\u003cli\u003eHumidity: 0 to 95%, non-condensing\u003c\/li\u003e\n\u003cli\u003eAltitude: not characterized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (Overall):\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e3.1 inches wide (7.9 cm)\u003c\/li\u003e\n\u003cli\u003e1.5 inches high (3.8 cm) without belt clip, 1.8 inches (4.6 cm) with belt clip\u003c\/li\u003e\n\u003cli\u003e4.0 inches deep (10.2 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.5 pounds (0.2 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":50108985114857,"sku":null,"price":567.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/1323\/2361\/files\/STIModel362A.jpg?v=1770683133","url":"https:\/\/shop.broadcastshop.ca\/products\/studio-technologies-model-362a-listen-only-beltpack","provider":"Broadcast Shop","version":"1.0","type":"link"}