{"product_id":"studio-technologies-model-381-on-air-beltpack","title":"Studio Technologies Model 381 On-Air Beltpack","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eModel 381 On-Air Beltpack\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoffers a unique combination of audio resources to directly support a complete broadcast \"stand-up\" on-air position. Using Dante® audio-over-Ethernet technology, the unit provides main and talkback output channels, talent cue (IFB) input, and sidetone capabilities, as well as essential user controls in a compact, portable package. The Model 381 is compatible with the Dante Domain Manager™ (DDM) software application and is AES67-compliant for direct integration into many contemporary networked audio applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante audio-over-Ethernet technology\u003c\/li\u003e\n\u003cli\u003eCreates complete \"stand-up\" on-air position\u003c\/li\u003e\n\u003cli\u003eOne main and one talkback output channel\u003c\/li\u003e\n\u003cli\u003eHighly-flexible 2-channel headphone output\u003c\/li\u003e\n\u003cli\u003eIntegrated sidetone function\u003c\/li\u003e\n\u003cli\u003eExcellent audio quality\u003c\/li\u003e\n\u003cli\u003eUses STcontroller for configuration\u003c\/li\u003e\n\u003cli\u003ePower-over-Ethernet (PoE) powered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePower Source:\u003cbr\u003ePower-over-Ethernet (PoE): class 2 (low power, ≤6.49 watts)\u003c\/p\u003e\n\u003cp\u003eNetwork Audio Technology:\u003cbr\u003eType: Dante audio-over-Ethernet\u003cbr\u003eAES67-2013 Support: yes\u003cbr\u003eDante Domain Manager (DDM) Support: yes\u003cbr\u003eBit Depth: up to 24\u003cbr\u003eSample Rate: 44.1,48, 88.2, and 96 kHz\u003cbr\u003eNumber of Transmitter (Output) Channels: 2\u003cbr\u003eDescription of Transmitter Channels: main (pre- or post-compressor, selectable), talkback (post-compressor)\u003cbr\u003eNumber of Receiver (Input) Channels: 2\u003cbr\u003eDescription of Receiver Channels: headphone channel 1 and headphone channel 2\u003cbr\u003eDante Audio Flows: 4; 2 transmitter, 2 receiver\u003c\/p\u003e\n\u003cp\u003eNetwork Interface:\u003cbr\u003eType: 100BASE-TX, twisted-pair Ethernet, Power-over-Ethernet (PoE) supported\u003cbr\u003eData Rate: 100 Mb\/s (10 Mb\/s and 10000 Mb\/s \"GigE\" Ethernet not supported)\u003c\/p\u003e\n\u003cp\u003eMicrophone Input:\u003cbr\u003eCompatibility: dynamic or phantom-powered microphones\u003cbr\u003eType: balanced, capacitive coupled\u003cbr\u003eImpedance: 2.8 k ohms, nominal\u003cbr\u003eGain: 36, 42, 48, 54, and 60 dB, selectable\u003cbr\u003eFrequency Response: 30 Hz to 20 kHz, –3 dB at 30 Hz, –0.6 dB at 20 kHz\u003cbr\u003eDistortion (THD+N): \u0026lt;0.020%, 1 kHz, 36 dB gain, –32 dBu input level\u003cbr\u003eDynamic Range: 96 dB, A-weighted\u003cbr\u003ePhantom Power: P48 per IEC 61938 standard, on\/off selectable with status LED\u003c\/p\u003e\n\u003cp\u003eCompressor:\u003cbr\u003eApplication: always used for Dante talkback audio output channel, can be used for Dante main output channel\u003cbr\u003eThreshold: 1 dB above nominal level (–19 dBFS)\u003cbr\u003eSlope: 2:1\u003cbr\u003eStatus LED: compressor active\u003c\/p\u003e\n\u003cp\u003eHeadphone Output:\u003cbr\u003eType: 2-channel\u003cbr\u003eCompatibility: intended for connection to stereo (dual-channel) or mono (single-channel) headphones, headsets or earpieces with nominal impedance of 50 ohms or greater\u003cbr\u003eMaximum Output Voltage: 3.1 Vrms, 1 kHz, 150-ohm load\u003cbr\u003eFrequency Response: 20 Hz to 20 kHz, +0\/–1 dB\u003cbr\u003eDistortion (THD+N): 0.001%, +10 dBu output, 150-ohm load\u003cbr\u003eDynamic Range: \u0026gt;102 dB\u003c\/p\u003e\n\u003cp\u003eConnectors:\u003cbr\u003eMicrophone Input: 3-pin female XLR\u003cbr\u003eHeadphone Output: ¼-inch 3-conductor jack\u003cbr\u003eEthernet: Neutrik etherCON RJ45\u003cbr\u003eUSB: type A receptacle (located inside Model 381's enclosure and used only for updating firmware)\u003c\/p\u003e\n\u003cp\u003eConfiguration: uses Studio Technologies' STcontroller personal computer application, version 1.08.00 and later\u003c\/p\u003e\n\u003cp\u003eEnvironmental:\u003cbr\u003eOperating Temperature: 0 to 50 degrees C (32 to 122 degrees F)\u003cbr\u003eStorage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)\u003cbr\u003eHumidity: 0 to 95%, non-condensing\u003cbr\u003eAltitude: not characterized\u003c\/p\u003e\n\u003cp\u003eDimensions (Overall):\u003cbr\u003e3.1 inches wide (7.9 cm)\u003cbr\u003e1.5 inches high (4.0 cm) w\/out belt clip; 1.8 inches (4.6 cm) with belt clip\u003cbr\u003e4.9 inches deep (12.5 cm)\u003c\/p\u003e\n\u003cp\u003eDeployment: intended for portable applications; contains integral belt clip\u003c\/p\u003e\n\u003cp\u003eWeight: 0.5 pounds (0.23 kg)\u003c\/p\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":50142716920041,"sku":null,"price":1057.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/1323\/2361\/files\/M381.jpg?v=1770750802","url":"https:\/\/shop.broadcastshop.ca\/products\/studio-technologies-model-381-on-air-beltpack","provider":"Broadcast Shop","version":"1.0","type":"link"}